![]() The Star Configuration Utility should then be shown as seen above. You'll initially be asked to choose an emulation for your printer. To enable the Star OPOS driver follow these next steps.įrom the Start Menu, select Configuration Utility in the StarMicronics program group. Once the Star Windows driver has finished installing we now need to configure the Star OPOS driver to allow EPOS-Excel to communicate with it. Follow the installation steps to complete the installation, choosing all default options when prompted.Click on the version of the driver that suits your operating system (either 32 or 64 bit).Although this driver is labelled as for "Windows 7 Support" it should also work with XP & Vista.The first step to installing your TSP100 is to download the latest Windows printer driver from the Star Micronics website. This cable should have a Type A USB connector on one end and a Type B USB connector on the other end. The Star TSP100 should be shipped with a USB cable that will connect the two interfaces together. The USB port on a standard PC however is different and is known as a "Type A" USB connector as shown below. The Star TSP100, when configured with a USB interface, has a USB "Type B" connector on the back of it as shown below. There are a few variations of this model including the TSP143 (with auto paper cutter) and the TSP113 (with tear bar cutter only). ![]() The Star TSP100 is a very popular thermal slip receipt printer.
0 Comments
Leave a Reply. |